cleaning brush should be preceded by coating the surface

1 cleaning brush should be preceded by coating the surface , such as the uneven surface repairs need to be coated flat Judai it completely dry , then spray acrylic series of pre- white ( plain ) primer better.
2 phosphorescent luminous paint to make better suggestions before brushing sure to spray acrylic series white ( plain ) primer for the bottom .
After 3 after spraying or brushing  glow in the dark pigments  to be completely dry , then paint luminous paint , please pick the same direction as the way to complete a thick coating material coated paint job , wait 15-20 minutes until their surface slightly dried in the same manner as in the aforementioned operation for the second channel .
4 Do not brush when brushing over or under construction around brushing moves back and forth in order to avoid uneven luminous walk produce scattered , resulting in a serious impact on their luminescent capacity.
5 Road brushing each time interval 15-20 minutes is appropriate , recommend brushing at least four cases of uniform minimum standards , as brushing can be added after the fifth channel or more ,  photoluminescent pigment suppliers  of the film thickness its luminescent stronger ( ie, better brightness at night ) .
6 luminous paint ( touch dry time is about 20-30 minutes ) , after the completion of the visual needs brushing or spraying again on brushing lacquer to make a more beautiful luminous paint surface using time more durable .