glow in the dark stones to prevent the danger

The material used for the signal , note writing , emergency evacuation routes , subway stations , underpasses , civil air defense projects , karaoke ok hall, dance hall, theater , supermarket stores , hospitals , railway stations , airports , docks , shelter , etc., glow in the dark a role in preventing dangerous occurrence .
Three buildings : the building of the material applied to the walls , ceramic tile, the inner surface of elevators, bridges, roads , such as road signs, road studs , roadblocks , ports , outdoor advertising is not only beautiful and practical value. Other: If Crafts: amber , crystal sand, glass , painting ; toys: plastic toys , puzzles , building blocks ; clothing : hats , gloves , overalls , t-shirts , shirt, helmet , printing clothing ; masterbatch glow in dark , fishing and so on.
4 . The best use of its long-lasting luminous scope and conditions of use, please refer to the specific luminous manual or technical advice.

Use more beautiful Photoluminescent Masterbatch

Road sprayed each time between 5-10 minutes is appropriate , should be sprayed at least three of the minimum benchmark , depending on the case even after spraying ; fourth channel can be sprayed or more together , with thickening of the phosphorescent paint film thickness garden decorative stones ability stronger ( ie, better brightness at night ) .
Luminous paint ( touch dry time is about 15-20 minutes ) , after the completion of the visual needs of spraying again sprayed with lacquer to make a more beautiful luminous paint surface using time more durable .
STORING luminous paint to make better , be sure to spray is recommended before spraying acrylic series white ( plain ) primer for the bottom .
After spraying the primer is completely dry , Phosphorescent Ceramic luminous paint spraying , please be coated surface from 15-25 cm is appropriate, spray a thin layer of about 5-10 minutes or so and then be sprayed a second channel .

photoluminescent sheet notes

a. luminescent pigment than significant, note the use of mixing .b. metallic materials have a greater impact on the luminescent properties, should avoid contact with metal.c. luminescent pigment mostly soluble in water, decomposed in acid , so the system can not be applied glow in the dark rock and acid system.d. according to your manufacturing process, select the appropriate granularity of luminescent pigmente. should be stored in ventilated, dry environment , pay attention to moisture , failed to finish using a luminescent pigment should be noted sealed.
f. usually large luminous powder particle size , brightness better. However, we recommend , first according to decorative aggregate process, select the appropriate granularity of luminous paint.
Luminous packaging , transportation and storage :1 , Packing: waterproof plastic bags for packaging , packaging packed with iron ( 25 kg / barrel ) , also according to customer requirements, the use of other forms of packaging :2 , Transport : Transport prevent collisions , squeeze , prevent sun and rain , not allowed to handstand .3 , Storage: Store in ventilated , dry environment , pay attention to moisture

Luminous paint color

1 translucent yellow and green - the day the appearance of yellowish liquid, the luminescent yellow green light.
2 Translucent Blue ---- daytime appearance is slightly yellow liquid, the luminescent blue light.
3 do not add directly spraying or brushing primer and translucent coating material on, if the light at the end luminous masterbatch does not affect the appearance.
Typical of luminous paint applications: apply to the display of objects and backings night
1 construction and decoration, interior decoration, lighting, painting, wall.
2 Identification of the night marked the power switch, tool or toolbox.
3.pub, ktv, store, large gatherings and other business premises landscaping.
4. Traffic signs, fire emergency escape systems, military equipment, garden landscaping.
5 watches, buttons, field instrument or photoluminescent paint suppliers, radios, cameras.
6 bicycles, motorcycles, cars, vehicle graphics and aluminum ring, steel ring.
7 Fishing equipment, aquarium equipment, banners, stickers, toys.
8 General jewelry, stunning image painted, ceilings and other landscaping ...
Luminous paint Applicability: containing solvents, can not paint on Styrofoam or easily solvolysis of items.

Luminous long luminescence characteristics

In real life, people use luminous glow characteristic long , made ​​of weak light source, in particular the usefulness of the military sector , to put this material is coated on aviation instruments, watches and clocks , windows, various switches the machine marks, glow in the dark rock , etc., can also be used together with a variety of translucent plastic pressed into a variety of symbols, parts , supplies ( such as power switches, sockets , fishing hooks, etc. ) . These light -emitting components after irradiation , or unexpected power outages at night , after getting up and so it continues lightning light, so that people around discernible direction ,photoluminescent plastic to work and life. The ultrafine particles mixed with luminous material in textiles , the color more vivid , luminous textile children wear can reduce traffic accidents.
Luminous materials at home and abroad mainly zns ( ZnS ), srs ( strontium sulfide ) and cas ( calcium sulfide ) made ​​of glow green and yellow . But srs, cas deliquescent material , to a wide range of applications difficult. So mainly zns matrix luminous material on the market. Afterglow time , but it is only 1 to 3 hours , and the light ( such as sunlight ) , pigments in paint and black perishable moist air , so that in many applications in the field is limited. Add drill, bronze activated zns luminous afterglow although a long time , but it has an infrared quenching phenomenon, electric lights ( including more red ) radiation , the afterglow quickly extinguished.

cleaning brush should be preceded by coating the surface

1 cleaning brush should be preceded by coating the surface , such as the uneven surface repairs need to be coated flat Judai it completely dry , then spray acrylic series of pre- white ( plain ) primer better.
2 phosphorescent luminous paint to make better suggestions before brushing sure to spray acrylic series white ( plain ) primer for the bottom .
After 3 after spraying or brushing  glow in the dark pigments  to be completely dry , then paint luminous paint , please pick the same direction as the way to complete a thick coating material coated paint job , wait 15-20 minutes until their surface slightly dried in the same manner as in the aforementioned operation for the second channel .
4 Do not brush when brushing over or under construction around brushing moves back and forth in order to avoid uneven luminous walk produce scattered , resulting in a serious impact on their luminescent capacity.
5 Road brushing each time interval 15-20 minutes is appropriate , recommend brushing at least four cases of uniform minimum standards , as brushing can be added after the fifth channel or more ,  photoluminescent pigment suppliers  of the film thickness its luminescent stronger ( ie, better brightness at night ) .
6 luminous paint ( touch dry time is about 20-30 minutes ) , after the completion of the visual needs brushing or spraying again on brushing lacquer to make a more beautiful luminous paint surface using time more durable .