The use of Fluorescent paint

A. Demand for covering large area of flat paint do not recommend the use of spraying (air spray gun is better).

B. When using an empty spray can be used directly without dilution or viscosity depending on the needs of spray consider to add diluent (with BAC or toluene may be), the amount of diluent should be added to ≦ 5% is appropriate, in order to avoid reducing their cover force.

C. luminous paint department genus (oily self-dry paint), containing polar solvent blend, general water-based paint and elastic coating paint erosion of fear in doubt, please use the former to be prudent in a small area or hidden at the first trial.

1. Clean the coated surface coating should be preceded, if uneven first renovation of the coated surface smooth; Judai it completely dry, and then

Pre-spray acrylic series white (plain) primer better.

2. In order to better STORING luminous paint is recommended to be sure before spraying spraying acrylic series white (plain) primer to the bottom.

3. When the spray primer is completely dry, then spray paint spraying luminous Please drape surface distance is 15-25 cm is appropriate, spray a thin layer of about 5-10 minutes or so until then spray the second track.

4. Each channel between 5-10 minutes spraying time is appropriate, should be sprayed at least three of the minimum benchmark, even after spraying depending on the circumstances; the fourth channel can be combined with spraying or more, with thickening of the paint film thickness of its STORING stronger (ie, better brightness at night).

5. luminous paint (touch dry time is about 15-20 minutes), after the completion of the visual needs spraying lacquer spray again, to make the surface more beautiful luminous paint more durable use of time.

Brushing with:

A. Pifu small area of the object is recommended brushing (using special paint brush).

B. When using the brush can be used directly without dilution or brushing thinner viscosity increases proportionally demand (with BAC or toluene may be), the amount of diluent should be added to ≦ 5% is appropriate in order to avoid reducing their opacity.

C. luminous paint are the property of (oil since dry spray / painting), containing polar solvent blend of general water-based paint, paint elastic coating erosion of fear in doubt, please use the former to be prudent in small area or shelter first trial.

1. Brushing should be preceded by cleaning the surface of the coating, such as uneven first renovation of the drape surface smooth Judai its completely dry, then spray acrylic pre-series white (plain) primer better.

2. In order to make better suggestions STORING luminous paint before brushing Always spray acrylic series white (plain) primer to the bottom.

3. After spraying or brushing until the primer is completely dry, then brushing luminous paint, please adopt accomplished in the same direction when brushing coating material

A thick coating operation, wait 15-20 minutes until their surface slightly after drying in the same manner as in the aforementioned second channel operations.

4. Do not over brush brushing construction under way or about to move back and forth brushing to avoid wandering produce luminous dispersed unevenly, leading to seriously affect their ability STORING.

5. Road brushing each interval to 15-20 minutes is appropriate, recommend brushing at least four cases of uniform minimum benchmark apparent after brushing it can be added a fifth channel or more, with the thickening of the film thickness STORING its stronger (ie, better brightness at night).

6. luminous paint (touch dry time is about 20-30 minutes), after the completion of the visual needs brushing or spraying on again brushing lacquer, to make the surface more beautiful Fluorescent paint more durable use of time.

Fluorescent paint Construction: luminous paint brush to go through after the formation of the film in order to function. Therefore, to fully dry.