1. The maximum glow in the dark powder function; luminous in glow in the dark sand places can last 12-15 hours, non-toxic, harmless, non-radiation! No burning, no explosion, does not contain heavy metals or other harmful chemicals, STORING short time, high brightness, long afterglow time, the maximum temperature can reach 1,300 degrees, dedicated to ceramics, luminous powder also has a very stable physical and chemical properties , strong environmental adaptability and extremely long service life, the effect can be achieved using the longest 30 years.
Note 2. luminous powder for coating; play luminous coating performance, must be complete and correct construction. Construction on the following considerations: the
(1) to understand the performance of luminous paint prescribed method of construction: if it is a professional construction time: Epica products company recommends spraying the polymer coated one to two agents on the ground floor and the completion of the film, so can enhance adhesion, weather resistance and paint face life.
(2) do a complete surface treatment: surface treatment proper or not, has a great influence on the performance and life of the film, it is necessary to completely remove rust, grease and other foreign matter to be constructed and fully dried after brushing.
(3) should be fully glow in the dark pigments paint Stir: luminous paint pigment, a mixture of resin solution and Yao Dexing luminous afterglow of a long-term science and technology, from manufacturing to use, there may be a period of time, but it is inevitable that the pigment separation of luminous and precipitation, and therefore should be fully stir before using.
(4) One of the brush thickness should not be too thick: once when the thickness of the brush if too thick, prone to effusion, wrinkles and other phenomena. So do the appropriate control, multi-layered coating to do the construction.
3. Stir luminous first before injection, not friction stir with iron, so luminous powder will be black, to use plastic stir stick or a layer of cloth, so luminous works best!
Peroxides, ester compound and the fluorescent dye: peroxides and Esters react after the reaction energy to the fluorescent dye, then the dye to fluoresce. Currently on the market is usually the common fluorescent substance placed a lance material sandwich, sandwich isolated inside and outside peroxides and esters, after rubbing, two compounds react makes fluorescent dyes glow in the dark dye .
没有评论:
发表评论