Luminous paint spraying glow in the dark dye

Use 

Luminous paint spraying: 

A. Demand for covering large area of flat paint do not recommend the use of spraying (spraying air gun is better). 

B. ** when using air spray, can be used directly without dilution or spray viscosity depending on the needs of discretionary add diluent (with BAC or toluene may be), glow in the dark pebbles‍ the amount of diluent should be added to ≦ 5% is appropriate, in order to avoid reducing its cover force. 

C. Department of luminous paint genus (oil painting from the dry), containing polar solvent blend of water-based paint and the general fear of elastic coating paint erosion of doubt, please use the former to be prudent in a small area or hidden at the first trial. 

1 spray coating surface cleaning should be preceded, if not flat first surface repairs will drape smooth; Judai it completely dry, then 

Pre-spray acrylic series white (plain) primer better. 

2 To make better STORING luminous paint is recommended to be sure before spraying spraying Acrylic white (plain) primer for the bottom. 

3 to be spray primer is completely dry, then spray luminous paint sprayed Please coated surface distance is 15-25 cm is appropriate, spray a thin layer of about 5-10 minutes or so and then be sprayed a second channel. 

Between 4 per channel spraying time to 5-10 minutes is appropriate, should be sprayed at least three minimum benchmarks, even after the case, as the spray; spray fourth channel can be coupled or more, with thickening of the paint film thickness of its STORING stronger (ie, better brightness at night). 

5 luminous paint (touch dry time is about 15-20 minutes), after the completion of the visual needs spraying lacquer spray again to make more beautiful luminous glow in the dark pigments‍ paint surface using time more durable. 

Brushing with: 

A. Pifu small area of ??the things recommended brushing (using special paint brush). 

B. When using the brush can be used directly without dilution or brushing viscosity increases proportionally thinner demand (in BAC or toluene may be), the amount of diluent should be added to ≦ 5% is appropriate in order to avoid reducing their opacity. 

C. Department of luminous paint genus (oily self dry spray / painting), containing polar solvent blend of general water-based paint, elastic coating paint erosion of fear in doubt, please use the former to be prudent in small area or shelter first trial. 

1 Brushing should be preceded by glow in the dark‍ coating the surface clean, if not flat first surface repairs will drape smooth Judai it completely dry, and then pre-spray acrylic series white (plain) primer better. 

2 To make better recommendations STORING luminous paint before brushing sure to spray acrylic series white (plain) primer for the bottom. 

After 3 to be spraying or brushing the primer is completely dry, then brushing luminous paint, please adopt accomplished in the same direction when brushing coating material 

A thick coating operations, after waiting for 15-20 minutes until their surface slightly dried in the same manner as the aforementioned second channel operations. 

4 Do not brush when brushing over construction under way or about to move back and forth brushing to avoid uneven luminous walk to produce dispersion, resulting in serious glow in the dark dye‍ impact on its light-storing capacity. 

5 per channel brushing interval 15-20 minutes is appropriate, recommend brushing at least four cases for uniform minimum benchmark, as the brushing can be added after the fifth channel or more, with thickening of the film thickness of STORING its stronger (ie, better brightness at night). 

6 luminous paint (touch dry time is about 20-30 minutes), after the completion of the visual needs brushing or spraying again on brushing lacquer to make a more beautiful luminous paint surface using time more durable. 

Luminous paint construction: luminous paint brush to go through after the formation of the film in order to function. Therefore, to fully dry.‍